How To Root Samsung Galaxy S3 SCH R530C using Odin

Root Samsung Galaxy S3 SCH-R530C using Odin

Step 1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer then Skip this Step. http://goo.gl/nvrBN4

DOWNLOAD USB DRIVER

Step 2: Download and extract the root files on your computer. After extracting you will be able to see the following files:

Download Root File LINK 1  LINK 2

Step 3: Now, Switch off your Smartphone.

Step 4: After switching-off the phone, you need to boot into Download Mode. To boot into download mode Press and hold Zoom Left and Power button at same time for 5-8 seconds until download mode is active.

Step 5: In the Download mode you will be able to see a Warning Yellow Triangle Sign. In this situation you have to press the Zoom Right key to continue.

Step 6: Now, Open Odin3 (found in the extracted files, that you have downloaded in the Step#2) on your computer. Then connect your Smartphone to the computer.

Step 7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show “Added” message at the lower-left panel.

Step 8: Once your device is detected by Odin, click on the PDA button and select the CF-Auto-Root.tar file (you have downloaded this file in step#2). http://goo.gl/nvrBN4

Step 9: Now, click on the Start button in Odin to begin the Flashing.

Step 10: Flashing usually takes 30-50 seconds to complete the rooting process on your Samsung Galaxy S3 SCH-R530C. Once Rooting process is completed you will be able to see a Green Box with Pass written on it in Odin. During this process Smartphone will re-boot automatically.

Step 11: Once you see, the Pass message in Odin, you can disconnect your Device from the computer.

Step 12: Now, to make sure you have successfully rooted your Samsung Galaxy S3 SCH-R530C, open Applications Menu on your Smartphone and Find SuperSU App. If this app exist on your Smartphone then it means you have successfully rooted your device. Congratulations.

Optional: You can also verify that your device is successfully rooted or not by Root Checker Application.

Read More

NXG Xtab A10 Flash a10 using LiveSuite Hard Reset DONE Download

1. Requirements:
(1) Windows PC
(2) USB Cable
(3) Upgrade tool (LiveSuit.exe)
(4) Firmware image file
(5) Windows USB drivers

2.Upgrade Steps:
(1) Unzip the upgrade tool and USB drive to your hard driver
    Double-click the LiveSuitPack10x_english.exe file, it will automatically install the driver files. Click "OK" to complete the driver installation.

(2) Open LiveSuit.exe
    Double-click to open the upgrade tool LiveSuit.exe

(3) Select the firmware
    Click the "SelectImg" button (the first button from the left) to select the firmware .img file.

(4) Turn off your tablet

(5) Press the key combination to start it in the upgrade mode
    a. Press the "Vol -" key, then press the "Power" button, hold two buttons at the same time
    b. Connect the USB cable to tablet and computer
    c. After connecting the USB cable, press the power button 6 times quickly or hold the "Vol -" keys and the "Power" button for more than 6 seconds (you should get a pop up window if done correctly , if not repeat step 5 from beginning)
    d. DONT release the "Vol -" button till the LiveSuit window pops up
    e. You can now release the "Vol -" button
    (Note: If you install the driver at this time the pop-up dialog box, the path to point to installation directory UsbDriver LiveSuit folder, click Next to complete the driver installation prompts).
    You should see LiveSuit window pops up; otherwise, you didnt do it correctly, you have to repeat step 4 and 5.

(6) Select the format to force upgrade
    Livesuit prompt "force format", click "Yes" (Y). All of the original apps installed will be removed.We highly recommend mandatory format! ! ! Otherwise the update is not complete and may brick! ! !

(7) Upgrade begins
    Pop-up "OK to force format" dialog box, select "Yes", the upgrade begins.

(8) The upgrade is complete
    Firmware download process last about three and a half minutes or so, please wait until the prompt "upgrade successful."

(9) Automatic restart
    After the upgrade is complete, your tablet will automatically restart, then you can unplug the USB cable.
    Slow start-up for the first time, please be patient.
    If the machine does not restart automatically, press and hold the Power button for 8-10 seconds or more to ensure the power switch off, then press the Power button 3 seconds or more to turn on your tablet.

(10) Congratulations! You have flashed the firmware.
NXG Xtab A10 with OG flash file&tool



Firmware link#
NXG_Xtab_A10_StockROM_ICS_4.0.3_
NXG_Xtab_A10_StockROM_ICS_4.0.3_1st_April_2012
Flash tool link#
A10_Lve Suit
A10_LiveSuitPack_version_1.09_20111101
Drivers link#
ABD Drivers
ADBDrivers

Read More