Sunday, April 19, 2015

Nokia Asha 203 Speaker Ear peace problem solution jumper ways

If you have speaker problem in nokia asha 203. Low ear peace voice. Noise in nokia asha 203 speaker ear peace. No voice during call in ear peace speaker. All these problems can be solve by following these tips and tricks that are given in this post.Nokia Asha 203 Not charging problem solution jumpers
Nokia Asha 203 Speaker Ear peace problem solution jumper ways
After dis assemble of nokia asha 203 replace ear peace speaker and check it again. If replacement of speaker can not solve the problem then you can check all these tracks that are given in above repairing diagram of nokia asha 203. If any component of these is missing or link is break you have to apply jumper.
Two different color lines are given in nokia asha 203 ear peace speaker diagram for solution. Small circles are given to identify points where you can apply jumpers in case of missing tracks or damage parts.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Friday, April 17, 2015

Nokia X3 Earpiece Speaker No sounds can be heard solutions

Heres a solution for nokia X3 Earpiece Speaker No sounds output can be heard, If you ever struggling to fix or repair this kind of problem and you already replace the earpiece speaker and the flex cable wire but the problem still exists. This solution may help and possibly fix the problem occurred.
 The solution shows below the components that may need to check and replace if found damaged. This components is composed of filter coils a fusible resistor with 0 ohms resistance values.



Nokia X3 Earpice Speaker Sounds failure problem solution
nokia x3 earpiece speaker jumper ways tracks
Repair tips: After ensuring that the earpiece speaker is working okay and the flex cable also perfectly fine or having it replaced with a new one but the problem still unsolved. You may check the components indicated on the solution picture above, first check the two resistors, these resistors has 0 ohms value. next check also the filter coils if open and also the capacitors and ESD filter resistor id shorted or not. Check also the line tracks of each corresponding Pins from the flex pin connector. It is connected  to pin 17 and 18 as marked also in the solution above.
If ever found a damaged, open or shorted components, replace it at once then try to reassemble back the device and have a test.

Wednesday, April 15, 2015

nokia Asha 200 Camera Problem Solution Jumper Ways

if Nokia Asha 200 camera is not working we can not take pictures and make video from Nokia Asha 200.for making video or taking snaps it is to much necery that we solve Nokia Asha 200 camera problem so that it can be used for taking snaps and photos.Nokia 111 No Power On with Battery Problem Solution


to solve Nokia Asha 200 camera switch button we can follow steps as given in above diagram.first remove camera from jack and check its points may they have some carbon or water damage so clean these point with electronics cleaner and aplly some hot air to dry board.
then check all these track as shown with differnent colors in above diagram.all these colores define path and track and parts which are used in camera function.so if any link is broken apply jumpers and parts are missing or damag replace them to solve Nokia Asha 200 camera not working problem solution.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Monday, April 13, 2015

Android Tool 1 4 Pattern Unlock IMEI Repair OC Root APK

Android Tool 1.4 Pattern/Unlock IMEI/Repair OC Root APK
1. Root for all devices
2. MTK IMEI repair
3. Contact backup/restore
4. Wipe Device Format
5. Remove Pattern/Gmail/Pin/Password
6. Change Boot Animation
7. Read device Info
8. System Partitions view
9. APK Install Batch (SD Support)
10. Integrated Application of Ultimate-Samsung Pattern unlock by my good friend Dawood
11. Fix compatibility Porblems when installing APKs
12. App2SD changes the installation path to sdcard
13. Install Arabic Language (using morelocal and arabic keyboard)


Application Requires Internet Connection and Registration by email and Phone number









DOWNLOAD HERE

Saturday, April 11, 2015

Nokia 5030 Charging problem solution Charger No Response Repair solution

Having a Charger No Response indications is a sign of a defective battery charger, charging pin connector and some of the components on the PCB Board like the chip fuse is being busted or damaged.
This solution below may possibly help fix and repair Nokia 5030 Charger no response indication. It shows the location of chip fuse on the main pcb board that needs to check and replace when a charger no response occurred.


Nokia 5030 Charger No response  solution (Not charging Repair)
nokia
The chip diode may also damaged and cause short circuit, a shorted diode make the chip fuse blown again, replace it if found shorted.

Thursday, April 9, 2015

Samsung Galaxy Tab 3 7 0 Lite SM T111 How to Install T111XXUBNB2 Android 4 2 2 Jelly Bean Firmware

Samsung Galaxy Tab 3 7.0 Lite SM-T111- How to Install T111XXUBNB2 Android 4.2.2 Jelly Bean Firmware,T111XXUBNB2 Android 4.2.2 Jelly Bean Firmware Last Updated on 26-Feb-2014. Samsung Galaxy Tab 3 7.0 Lite SM-T111 (3G) recently received the XXUBNB2 Android 4.2.2 Jelly Bean official firmware update. Samsung started rolling out an OTA update about the firmware. The latest firmware build version is T111XXUBNB2. The Galaxy Tab 3 7.0 Lite recently announced by Samsung with  Android 4.2.2 Jelly Bean and already received official firmware update. Here we have the latest available firmware for the device. If you own the device and not yet updated this latest firmware, then update the same using our simple tutorial below. The below guide will help you to download and install the T111XXUBNB2 Android 4.2.2 Jelly Bean firmware manually through Odin.
 Samsung Galaxy Core LTE SM-G386F- How to Install G386FXXUANB4 Android 4.2.2 Jelly Bean Firmware
If your Galaxy Tab 3 7.0 Lite T111 already running on Android 4.2.2 Jelly Bean, you can only expect few bug fixes and performance enhancement with this latest firmware update.
So, want to update your Galaxy Tab 3 7.0 Lite T111 to the latest XXUBNB2 Android 4.2.2 Jelly Bean firmware? For official way, either you can go for   OTA (over the air) from Settings-About Tablet-Software Update or download firmware through the Samsung Kies utility. However, if you are looking for a manual way to update the latest Android 4.2.2 XXUBNB2 firmware on your Galaxy Tab 3 7.0 Lite T111 through Odin then follow the step by step manual update guide below.

Important Note:

“The firmware is released only for the Samsung Galaxy Tab 3 7.0 Lite SM-T111 model, so don’t try this in any other android device. Check your device model number from Settings-About Tablet. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your Tablet”.

Android 4.2.2 Jelly Bean T111XXUBNB2 Official Firmware Download List

Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy Tab 3 7.0 Lite SM-T111 model.
Nepal: NPL-T111XXUBNB2-20140226143656.zip
Sri Lanka: SLK-T111XXUBNB2-20140226143731.zip
India: INS-T111XXUBNB2-20140225110741.zip
[Firmware for rest of the countries and carrier will be added here when available]

Previous Firmware Build

Samsung Galaxy S4 SCH-R970- Simple Tutorial Root R970TYUEMK2 Android 4.3 jelly bean Firmware
Samsung Galaxy S3 LTE SHV-E210L- How to Install E210LKLUGNA1 Android 4.3 Jelly Bean Firmware
Samsung Galaxy S4 LTE GT-I9505- How to Install I9505XXUENA8 Android 4.3 Jelly Bean Firmware

Pre-Requisites:

  • Check battery percentage, your device should have at least 80% battery power
  • Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
  • Backup important data and settings to external storage- follow this guide
  • Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

  • If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
  • Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
  • After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.
All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.2.2 T111XXUBNB2 official firmware on Galaxy Tab 3 7.0 Lite T111.

How to Install Android 4.2.2 Jelly Bean Official Firmware on Galaxy Tab 3 7.0 Lite T111 through Odin:

Samsung Galaxy Tab 3 7.0 Lite SM-T111- How to Install T111XXUBNB2 Android 4.2.2 Jelly Bean Firmware
  1. Download Android 4.2.2 XXUBNB2 Firmware for Galaxy Tab 3 7.0 Lite T111 from the above list
  2. Download Odin 3.09
  3. Switch off your Tablet and boot Galaxy Tab 3 7.0 Lite T111 into Download Mode by pressing and holding the Volume Down and Power keys together until you get the warning message, now press Volume Up key to proceed to Download Mode..
  4. Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
  5. Now connect your Galaxy Tab 3 7.0 Lite T111 to your computer via USB cable
  6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
  7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
  8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
  9. In Odin screen, click on PDA button and select the firmware file with .tar.md5 extension (The firmware file look something like: T111XXDLJ5_T111ODDDLI7_INU.tar.md5)
  10. Now, click on the Start button to begin the installation process, wait few moments.
  11. Once completed, you would see “PASS!” message in ID:COM port having green background
  12. Your Tablet should automatically reboot after completion
  13. You can now disconnect your Tablet from computer
  14. Finish
Congrats! Your Galaxy Tab 3 7.0 Lite T111 is ready now with the latest available firmware.  Hope you successfully update XXUBNB2 Android 4.2.2 Jelly Bean official firmware on Galaxy Tab 3 7.0 Lite SM-T111. If you followed everything as mentioned in the above tutorial, then your device should now running on the latest Android 4.2.2 Jelly Bean build version XXUBNB2. You can verify the firmware update details from Settings-About Tablet. For any queries feel free to contact with us any time and don’t forget to share your experience in the comment below.

Tuesday, April 7, 2015

nokia 111 display light solution jumpers

nokia 111 light problem , nokia111light problem , nokia 111-2 light problem , nokia111light problem, 111, nokia 111 light problem solution, nokia111laight solution ,
Nokia 5800 mic not working problem solution jumper ways
nokia 111 display light solution jumpers
111-2 light solutin on gsm forum, nokia 111 light nokia 111 light carquet, nokia 111 light soi, nokia 111 leteast, ways, nokia 111 liqht problem solution this solution many time tested see and try this i hope solved your problem.

Sunday, April 5, 2015

Nokia C2 03 Camera Standby Notworkin Problem Solution Jumper Ways

Nokia C2-03 Camera Problem, Nokia C2-03 Camera Standby Mode can be cause of water damage or breakage. To solve this problem in the mobile phone you can follow a few steps that i am going to describe in this post.Nokia 5250 fake charging not save battery problem solution
Nokia C2-03 Camera Standby Not working Problem Solution Jumper Ways
In first step restore factory setting in Nokia C2-03. Then make a full flash (software firmware) installation. And the third step is to check hardware diagnostings. After dis assambly of phone check the whole mother board carefully.If there is some rust or carbon on board then clean it with electronics cleaner and apply some heat with hot air. So that the mother board can be dry.
If mother board can not be full dry it can create carbon in future so keep in mind it should be dry.Do not apply much heat as it can harm your skin and mother board of cell phone.
In above diagram as you can see there are different color lines. These lines are indicating tracks that are used in camera function so check these paths and apply jumpers as shown in above diagram.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Friday, April 3, 2015

Nokia 2330 classic network problem solution ways

if nokia 2330 classic have no network problem or signal are too low then you can resold and rehot these two main parts that are shown in re lines and if the problem is not solved you can replace these two parts that are used in network functioning in nokia 2330 classic.check antenna also at the bake side of buddy.some times it antenna is not attached properly then it will not work also and give us signal problem also.Nokia E52 speaker ear piece problem solution jumper ways
Nokia 2330 classic network problem solution ways.

for more detail and new tips and tricks about this problem keep visiting this page we will update it timely with new diagrams.some related post are also given bellow you can read them also for more information.

Wednesday, April 1, 2015

Nokia C2 01 Hand Free Problem Solution Jumper Ways

Nokia C2-01 Hand Free Problem Solution Jumper WaysNokia C2-01 it can be solve with a few steps that I am going to post in this post. If hand free is open you will see a notification of hands fee in Nokia C2-01 while hand free is not plugged in Nokia C2-01 Bluetooth Fm Radio is Not Working Solution see all cellular mobile repairing solution
To solve Nokia C2-01 Hendfree problem remove Ic that is identified with red line.you can apply jumper as shown in above diagram and in above diagram you can find jumper in red line.
Once you apply jumper hand free problem will be solve. And if it cannot be solve with applying jumper you can replace hands free jack.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.